View 2SC1623-T1B_391017.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

DATA SHEET
SILICON TRANSISTOR
2SC1623
NPN SILICON EPITAXIAL TRANSISTOR MINI MOLD
FEATURES
* High DC Current Gain: hFE = 200 TYP. (VCE = 6.0 V, IC = 1.0 mA) * High Voltage: VCEO = 50 V
PACKAGE DRAWING (Unit: mm)
2.8 0.2
0.4 +0.1 -0.05
1.5 TYP.
0.65 -0.15
+0.1
ABSOLUTE MAXIMUM RATINGS
Maximum Voltages and Current (TA = 25C) Collector to Base Voltage VCBO 60 V Collector to Emitter Voltage VCEO 50 V Emitter to Base Voltage VEBO 5.0 V Collector Current (DC) IC 100 mA Maximum Power Dissipation Total Power Dissipation at 25C Ambient Temperature PT 200 mW Maximum Temperatures Junction Temperature Tj 150 C Storage Temperature Range Tstg -55 to +150 C
2.9 0.2 0.95 0.95 TYP. TYP.
2 3
0.3 TYP.
Marking
1.1 to 1.4
1: Emitter 2: Base 3: Collector
ELECTRICAL CHARACTERISTICS (TA = 25C)
CHARACTERISTIC Collector Cutoff Current Emitter Cutoff Current DC Current Gain Collector Saturation Voltage Base to Saturation Voltage Base to Emitter voltage Gain Bandwidth Product Output Capacitance SYMBOL ICBO IEBO hFE VCE(sat) VBE(sat) VBE fT Cob 0.55 90 200 0.15 0.86 0.62 250 3.0 MIN. TYP. MAX. 0.1 0.1 600 0.3 1.0 0.65 V V V MHz pF UNIT TEST CONDITIONS VCB = 60 V, IE = 0 A VEB = 5.0 V, IC = 0 A VCE = 6.0 V, IC = 1.0 mA IC = 100 mA, IB = 10 mA IC = 100 mA, IB = 10 mA
Note Note Note Note
A A
VCE = 6.0 V, IC = 1.0 mA
VCE = 6.0 V, IE = -10 mA VCE = 6.0 V, IE = 0 A, f = 1.0 MHz
Note Pulsed: PW 350 s, Duty Cycle 2% hFE CLASSIFICATION
Marking hFE L4 90 to 180 L5 135 to 270 L6 200 to 400 L7 300 to 600
The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version.
Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information.
Document No. D17115EJ2V0DS00 (2nd edition) (Previous No. TC-1481C) Date Published March 2004 N CP(K) Printed in Japan
The mark
shows major revised points.
to 0.1
0.16 +0.1 -0.06
0.4 -0.05
+0.1
1
c
1984
2SC1623
TYPICAL CHARACTERISTICS (TA = 25C)
TOTAL POWER DISSIPATION vs. AMBIENT TEMPERATURE 200
PT - Total Power Dissipation - mW
180 160 140 120 100 80 60 40 20 0 -20 0
Free air
20 40 60 80 100 120 140 160 180 TA - Ambient Temperature - C
COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE 100
1.0 0.9 0.8 0.7 0.6 0.5 0.4
10
COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE 45
40
IC - Collector Current - mA
IC - Collector Current - mA
80
8
35 30
60
6
0.3
40
0.2
25 20
4
15 10 IB = 5.0 A
20
IB = 0.1 mA 0 0 0.4 0.8 1.2 1.6 VCE - Collector to Emitter Voltage - V 2.0
2
0
0
0
0 10 20 30 40 VCE - Collector to Emitter Voltage - V
50
DC CURRENT GAIN vs. COLLECTOR CURRENT
DC CURRENT GAIN vs. COLLECTOR CURRENT VCE = 6.0 V Pulsed
1000
1000
hFE - DC Current Gain
500 300 100 50 30 10 5 3 0.1 0.2
hFE - DC Current Gain
VCE = 6.0 V 1.0 V 0.5 V
500 300 100 50 30 10 5 3 0.1 0.2
TA = 75C 25C -25C
0.5 1.0 2.0 5.0 10 20 IC - Collector Current - mA
50 100
0.5 1.0 2.0 5.0 10 20 IC - Collector Current - mA
50 100
2
Data Sheet D17115EJ2V0DS
2SC1623
COLLECTOR CURRENT vs. BASE TO EMITTER VOLTAGE VCE = 6.0 V 50 Pulsed 20 10 5 2 1 0.5 0.2 0.1 0.05 0.02 0.01 COLLECTOR AND BASE SATURATION VOLTAGE vs. COLLECTOR CURRENT
VBE(sat) - Base Saturation Voltage - V VCE(cat) - Collector Saturation Voltage - V
100
10 5 2 1 0.5 0.2 0.1 0.05 0.02 0.01 0.1 0.2 0.5 1 2 5 10 20 IC - Collector Current - mA VCE(sat) VBE(sat)
Pulsed IC = 50 A * IB 20 10
IC - Collector Current - mA
75
C
25C
-25 C
TA =
IC = 50 A * IB 20 10
0.2 0.3
0.4 0.5 0.6 0.7 0.8 0.9 VBE - Base to Emitter Voltage - V
1.0
50 100
GAIN BANDWIDTH PRODUCT vs. EMITTER CURRENT 10000 100 50
INPUT AND OUTPUT CAPACITANCE vs. REVERSE VOLTAGE f = 1.0 MHz
fT - Gain Bandwidth Product - MHz
5000 2000 1000 500 200 100 50 20 10 -0.1 -0.2 VCE =10 V 6 V 2V 1V
Cib - Input Capacitance - pF Cob - Output Capacitance - pF
20 10 5 2 1 0.5 0.2 0.1 0.1 0.2
Cib (I
C
=0A
)
Cob (I
E
=0A
)
-0.5 -1 -2 -5 -10 -20 IE - Emitter Current - mA
-50 -100
0.5 1 2 5 10 20 50 100 VCB - Collector to Base Voltage - V VEB - Emittor to Base Voltage - V
SMALL SIGNAL CURRENT GAIN vs. DC CURRENT GAIN 1000
INPUT IMPEDANCE VOLTAGE FEEDBACK RATIO AND OUTPUT ADMITTANCE vs. SMALL SIGNAL CURRENT GAIN 100 50 50
hre - Voltage Feedback Ratio - x10-4
hfe - Small Signal Current Gain
hoe - Output Admittance - S
800
80
40
hie - Input Impedance - k
VCE = 6.0 V IC = 1.0 mA f = 1.0 kHz
40
VCE = 6.0 V IC = 1.0 mA f = 1.0 kHz
600
60
30
30 hoe hre hie
400
40
20
20
200
20
10
10
0
0
200
400 600 800 hFE - DC Current Gain
1000
0
0
0
200 400 600 800 hfe - Small Signal Current Gain
1000
Data Sheet D17115EJ2V0DS
3
2SC1623
NORMALIZED h-PARAMETER vs. COLLECTOR CURRENT 10 hie VCE = 6.0 V f = 1.0 kHz he(IC) He = he(IC = 1.0 mA) hoe hfe hfe 3 NORMALIZED h-PARAMETER vs. COLLECTOR TO EMITTER VOLTAGE ICE = 1.0 V f = 1.0 kHz He = he(VCE) he(VCE = 6 V)
He - Normalized h - Parameter
5 hre 2 1
He - Normalized h - Parameter
2 hoe hre 1 hfe hie hoe hfe hie hre
0.5 hoe hre 0.2 0.1 hie 0.1 0.2 0.5 1 2 IC - Collector Current - mA 5 10
0
10 20 VCE - Collector to Emitter Voltage - V
30
4
Data Sheet D17115EJ2V0DS
2SC1623
* The information in this document is current as of March, 2004. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. * No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may appear in this document. * NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC Electronics products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others. * Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. * While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC Electronics products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features. * NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to NEC Electronics products developed based on a customerdesignated "quality assurance program" for a specific application. The recommended applications of an NEC Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of each NEC Electronics product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to determine NEC Electronics' willingness to support a given application. (Note) (1) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its majority-owned subsidiaries. (2) "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as defined above).
M8E 02. 11-1
This datasheet has been download from: www..com Datasheets for electronics components.

▲Up To Search▲

Price & Availability of 2SC1623-T1B

	To Download 2SC1623-T1B Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .